FAQ

Frequently asked questions

Search below, or filter by category. Can't find your question? Email info@carshepherd.nl.

Hardware & setup

Which dongle and antenna do I need?
An RTL-SDR dongle based on the RTL2832U chip with TCXO (V3 or V4) plus an antenna for the TETRA band (around 380–400 MHz). See the Hardware page for specific links and a price guide (roughly €50 for everything).
Which phone do I need? Does it work on an iPhone?
You need an Android phone. An iPhone won't work, because iOS doesn't allow you to connect a dongle. Solution: a cheap Android device (~€100) that you use just for Carshepherd — you don't need an extra SIM card or contract for it.
Can I have the dongle and antenna built in?
Yes, you can tuck the antenna and dongle away neatly. In the future we'll provide a list of companies that offer this and what it costs. That said, it's fairly easy to do yourself.
I don't like wires and loose antennas. Are there solutions for this?
Yes, there are several good ways to handle this, and a guide is coming on how to tuck the dongle and antenna away neatly. A popular approach is a strip of Velcro on the dongle combined with the rubber duck antenna. Then all you have left is a lead to your phone, and you can easily take the dongle and antenna to another car.
How should I position the antenna?
The antenna must always be mounted vertically. Upside down is fine, as long as it's vertical. That has to do with the shape (polarisation) of the transmitted signals. Ideally place it vertically behind your windscreen or outside on the roof.
Can I buy several dongles for different cars, and does the app work with all of them?
Yes, the app works with any dongle you fit in different cars. The subscription is tied to your Google account, so you can use the same app on multiple devices.
Does Carshepherd work on an Android car system (head unit)?
Yes, as long as it is a full Android system that meets the requirements. Carshepherd runs as a normal Android app on a built-in Android car system (head unit), not as an 'Android Auto' projection from your phone. You need: Android 8 or higher, a Google Play Store with your Google account signed in (for installation and the subscription), USB host support for the dongle (plus the RTL2832U driver app), and ideally GPS in the unit for the GPS features. Whether a specific unit has USB host and the Play Store varies by model, so feel free to try it — the first month is free.

Range & operation

How far in advance am I warned — what's the range?
The range depends on the type of antenna and its placement. The simple whip antenna (sometimes included in package deals) already has a decent range, typically around 500 metres. This distance is ideal, because a larger range would trigger too many alerts for units that never come near you. Think of an ambulance driving a few streets away that will never cross your path. Note: Carshepherd only signals when the emergency service is actually transmitting radio waves.
I passed an ambulance recently but got no signal. How come?
That can happen when that ambulance wasn't transmitting a radio signal at that moment — and that's what Carshepherd responds to. It happens occasionally and varies by service. In practice, the police for instance transmit more than ambulances.
What exactly does Carshepherd respond to?
The radio traffic of emergency services on the Dutch C2000 network (TETRA). It responds to the transmissions from the vehicles themselves (the uplink), not to the transmitter masts — which is why the signal strength tells you something about how close the vehicle is.
Does Carshepherd read messages or see which service it is?
No. Carshepherd doesn't read or decrypt anything and can't see which service it is. It only shows that there is activity and how close it is.
Does it work abroad too?
Carshepherd is built for the Dutch C2000 (TETRA, 380–385 MHz uplink) and works across almost all of Europe, because emergency services there share the same band. The app supports both European radio technologies: TETRA, which most countries use (ASTRID in Belgium, BOS in Germany, Airwave in the UK, Scandinavia, Portugal and many more), and TETRAPOL, used by a small number of countries: France, Switzerland and Czechia. In total the app has its own settings for 25 European countries.
Does Carshepherd work on TETRAPOL?
Yes. Besides TETRA (C2000 in the Netherlands, ASTRID in Belgium, Airwave in the UK), Carshepherd also detects TETRAPOL, the radio technology a number of European countries use for their emergency services, including France and Switzerland. The app has a separate scan mode for it, which you select in the settings. TETRAPOL detection has been field tested on the Czech PEGAS network.
Sometimes I get an alert but see no emergency service. How come?
TETRA reaches far. Often it's a real but more distant unit (large radio horizon), or a vehicle on the other carriageway, behind buildings or just out of sight. The alert is justified; you just can't see the source.
What exactly are C2000 and TETRA?
C2000 is the national radio network the Dutch emergency services (police, fire, ambulance) use to communicate; it's based on the digital radio standard TETRA. Carshepherd passively listens for TETRA radio traffic from that network in your area and translates its proximity into a warning — without reading or decrypting anything.
What's the difference from the Target Blu Eye?
Carshepherd works on the same principle as the Target Blu Eye: it receives C2000/TETRA radio traffic from emergency services and warns you about it. The difference: Carshepherd is an app on your phone with a small dongle (± €50 of hardware plus a subscription) instead of an expensive box, and it gives separate warnings for an approaching emergency service and for one that travels alongside you for a while (the co-mover). See also the comparison page.

The app & the menu functions

What do the colours/levels on the screen mean?
It runs from green (weak) → yellow (moderate) → orange (strong) → red (very strong, with a blue glow). The higher it goes, the closer the emergency-service activity.
What is "Sensitivity" and how do I set it?
Sensitivity determines how quickly Carshepherd raises an alert based on signal strength (proximity). Tune it to your antenna/car: in a quiet spot, turn it down until the screen stays green/silent; higher = earlier alerts. 50 is the default. Important: sensitivity only changes the alert level — the detection itself stays the same, so you won't miss any emergency services.
What is "Antenna gain"?
The hardware amplification of the dongle. Getting a lot of alerts when there's no emergency service, or does your setup read "hot" (noise floor heading toward 0)? Turn the gain down until things calm down, then fine-tune with Sensitivity. Default 37 dB.
What is "Automatic calibration" and how do I do it?
Park the car in a spot where you're sure there's no emergency service nearby but Carshepherd is still picking up detections (ideally urban with a clear view), engine on and the antenna in its fixed place. Start the calibration and stay put for ~1.5 minutes. Carshepherd measures the background and sets gain + sensitivity so that ordinary chatter stays silent and only nearby units trigger an alert. The detection itself doesn't change.
Can I save my settings per car?
Yes. If you drive several cars, save your gain + sensitivity for each setup under a name (e.g. your car) and load it back in next time via "Load saved calibration".
What is "Wide scan (incl. 410–412)"?
This makes the app also scan the C2000 extension band (410–412 MHz) alongside the regular emergency-service band. Leave it on if you don't want to miss anything; it costs a little more scan time.
What is "Speed sensitivity boost"?
This automatically increases the sensitivity at higher speeds, so you're warned a bit earlier on the motorway.
What is "Network keep-alive" / the ambient radar?
A quiet radar indication (📡) that there's weak TETRA activity nearby that's still below the alert threshold. That way you know something's going on, even when nothing is close yet.
What is "Smart damping in busy TETRA areas"?
Optional (off by default). In areas with a lot of distant TETRA, the app temporarily raises the alert threshold to limit false alerts, and drops it immediately as soon as something gets really close.
What is the Co-mover alert?
It warns you when a unit travels alongside you for a longer time (e.g. an ambulance on the motorway). You then get a separate flashing light with sound, apart from the regular proximity alert.
What is "Show over other apps"?
This makes Carshepherd show a thin colour column (and a flashing light for a co-mover) over other apps, such as your navigation. That way you see the proximity while using Maps. For this you grant the "show over other apps" permission once.
What are the pop-up notifications?
A pop-up notification on a very strong (red) alert, even when your screen is off or you're busy in another app.
What does the speed camera/average-speed check warning and "Refresh GEO points" do?
A separate, legal feature: a warning for known, fixed speed cameras and average-speed checks based on public map data (OpenStreetMap). With "Refresh GEO points" you fetch the most up-to-date set of speed cameras, average-speed checks and facilities (police/hospital/fire/military) for your area.
What are the lit-up icons at the top (police, hospital, fire, military)?
When you come within 500 metres of a police station, hospital, fire station or military area, a small, silent icon lights up at the top for as long as you are nearby. For military areas the distance is measured from the outer edge. It is purely context and makes no sound.
What can I set under "Alarm preferences"?
Per facility type (police/hospital/fire/military) you can mute the TETRA alarm while you are within 500 metres: "suppress alarm sound" mutes the sound, "suppress alarm visuals" hides the alarm visuals. By default these are off.
What's the logging/export for?
For enthusiasts: you can export scans and confirmations. This data helps us improve the detection further.
Why does the app ask for "No battery restriction"?
Carshepherd scans in the background, behind your navigation. Android throttles background apps to save battery; that's why the app asks for exemption from battery optimisation, so scanning keeps running reliably.

Subscription & purchase

What does Carshepherd cost?
€3.99 per month, with a free first month. Cancel any time (monthly).
How do I take out a subscription?
Now available on Google Play. The first month is free; cancel monthly.
Can I cancel whenever I want?
Yes, the subscription can be cancelled monthly. If you cancel during the free trial month, you pay nothing.

Privacy, safety & legal

Is this legal / is this allowed?
Carshepherd is a tool for situational awareness and road safety — making way for emergency services in good time. It doesn't read or decrypt any communication and is not a radar detector; it only shows presence and proximity. Use it safely and obey the traffic rules.
Does Carshepherd replace my own alertness?
No. It's a tool, not a guarantee: a radio that isn't transmitting is invisible. Stay alert yourself and obey the traffic rules.
What happens to my data?
The detection runs locally on your phone. For the speed camera/average-speed check and facility features, public map data (OpenStreetMap) is fetched; your device sends the coordinates of your area to that service in the process. Carshepherd itself stores no data about you and therefore shares no data of or about you.
Is Carshepherd a radar detector?
No. A radar detector picks up speed radar or a laser gun; Carshepherd doesn't do that. Carshepherd is a situational-awareness tool that listens to the C2000/TETRA radio traffic of emergency services and warns you when there's activity nearby, so you can make way in time. For fixed speed cameras and average-speed checks there's a separate, legal feature based on public map data (OpenStreetMap).
Is Carshepherd a police detector or police scanner?
Carshepherd is sometimes called a 'police detector' or 'police scanner', but that's not how we describe it. It's a tool for situational awareness and road safety: it shows the presence and proximity of emergency-service radio traffic (police, fire and ambulance) so you make way in time. It doesn't read or decrypt anything, doesn't identify units and can't see which service it is.

← Back to home